Home » Public Forums » Imported from asmBB » Easy Step-by-Step Guide: How To Download And Install Kali Nethunter On Android Mobile
| Easy Step-by-Step Guide: How To Download And Install Kali Nethunter On Android Mobile [message #4] |
Thu, 30 July 2026 07:53 |
 |
admin
Messages: 275
Registered: July 2026
|
Senior Member
Administrator |
|
|
Kali Linux is a popular operating system that is frequently used in security audits and penetration testing. In the past, it was only available on desktop systems. However, the NetHunter Project makes it available for Android phones as well.
Basically, the NetHunter version of Kali Linux is specially designed for mobile devices, and it doesn’t run on desktop devices. So, if you are a small business owner who often relies on Android devices, then this tutorial is especially for you. Certainly, managing your business with a reliable security audit system is always better.
https://i.ibb.co/n1hVh4k/Net-Hunter-App.png
Steps Involve Installation of Kali Nethunter On Android Mobile
Install Termux Software on your Mobile phone.
Upgrade current repositories.
Install NetHunter on your system.
Start the Kali NetHunter installation.
Install NetHunterKeX on your computer.
1. Install Termux on Your phone.
Actually, Kali Linux NetHunter installation requires launching software, as Kali Linux was not originally designed for mobile devices. For this, you need to install Termux (it acts as a launcher). It is available on the Google Play Store, but we recommend downloading it from GitHub.
https://i.ibb.co/CHFKtZz/Net-Hunter-download-termux-png.webp
Click on the above-mentioned red-box to download the app. It took only a few seconds if you have a good internet connection. Now, open the downloaded file and install it.
Note:
Your computer is not going to allow you to install this app because the source is unknown. It asks for permission; click on Settings to set permission.
https://i.ibb.co/1qy9CqV/Net-Hunter-installing-termux-jpg.we bp
It directs your phone to the settings page, where you can set up permission for installation.
https://i.ibb.co/1vZSVnX/Net-Hunter-install-permisions-jpg.w ebp
Now you can install it on your system. For this, click on the Install button as shown in the below screenshot.
https://i.ibb.co/Qdk1qbG/Net-Hunter-install-termux-app-jpg.w ebp
Step 2: Upgrade Repositories On System
Kali Linux installation on an Android phone also asks to update repositories. Most advanced versions of Linux, such as Debian Linux, use the APT configuration system to install repositories. However, here we have an Android system that is not fully compatible with it.
Then how do I update repositories? Consider following these simple steps:
First, run the update command, which will retrieve package source information from available resources.
apt update
https://i.ibb.co/HTSdRRp/Net-Hunter-updating-repositories-jp g.webp
Second, run the upgrade command to upgrade your current package to the most advanced version.
apt upgrade
https://i.ibb.co/cg0SfZg/Net-Hunter-upgrading-repositories-j pg.webp
Next, Kali Linux asks you this question:
Do you want to continue? Click on the Y button on your keyboard, and then press the Enter button.
Next, you need to use the following command:
termux-setup-storage
it allows you to set up storage permissions for Termux.
https://i.ibb.co/gFRwQqw/Net-Hunter-setting-storage-permis-j pg.webp
Now, click on the Allow button to allow access on your Android phone. https://i.ibb.co/Vx1J1Rd/Net-Hunter-files-setup-jpg.webp
Step 3: Install NetHunter On Your Mobile Phone
Run the wget command to kickstart the installation process of NetHunter.
apt install wget
https://i.ibb.co/GQMgyBx/Net-Hunter-installing-wget-jpg.webp
It now again asks this question. Do you want to continue? Click on the Y button and press the Enter key.*
Now, you need to run this command:
Wget -O install-nethunter-termux https://offs.ec/2MceZWr
https://i.ibb.co/gJNdwb1/Net-Hunter-Installation-package-1-1 -jpg.webp This command allows you to download NetHunter, but make sure to enter your IP address correctly.
Now, make this downloaded file executable. To do so, run the following commands:
chmod +x install-nethunter-termux
https://i.ibb.co/pdVj0L0/Net-Hunter-setting-execution-perm-j pg.webp
Next, Execute NetHunter.
Use the following commands to do this:
./install-nethunter-termux
https://i.ibb.co/tcYs2tm/Nethunter-installation-jpg.webp
This step may take some time; however, if you have a good Internet connection, it will only take a few seconds.
Next, it asks this question:
Do you agree to remove the downloaded rootfs file or not?
https://i.ibb.co/7JFspDh/Net-Hunter-installed-jpg.webp Click on the no button to reply no.
Step 4: Start Kali NetHunter
Open Kali Linux's CLI (command-line interface) by running this command:
nethunter
https://i.ibb.co/wMNfV9K/IMG-20221014-044625-jpg.webp
Now, Exit the NetHunter CLI interface and run this command:
net hunter kex passwd
https://i.ibb.co/88SJPM5/Net-Hunter-Ke-X-password-jpg.webp
This command allows you to create password of your own desire.
Note:
Make sure to exit the NetHunter CLI interface before the above-mentioned command.
Nethunter kex passwd
Now run this command:
nethunter kex
Remember!, write down the RFB port number because you’ll need it later. https://i.ibb.co/dc954rH/Net-Hunter-Ke-X-jpg.webp
Now that you have the NetHunter system running on your system, you need to configure the display. To do so, please proceed to the next step.
Step 4: Install NetHunter KeX.
Now you need NetHunter Kex to configure the display.
1. Visit this website.
2. Download the NetHunter App on your device and install it.
https://i.ibb.co/xm7PnHg/Net-Hunter-app-store-jpg.webp
Note:
Please don’t confuse the NetHunter App Store with the Google App Store because NetHunter tools and extensions are only available on their official app store.
Open the App Store on your mobile, search for NetHunter Kex, and then install it. https://i.ibb.co/JxDjgXd/Net-Hunter-installing-Ke-X-jpg.webp
https://i.ibb.co/n78CDTy/Net-Hunter-Kex-Install-jpg.webp
Now, open NetHunter Kex to proceed further. It asks you to choose a username and password. You can choose whatever username you want, but consider using the password that you set in earlier steps. Additionally, you need to make sure that you have chosen a similar port number. Now, click on Connect.
https://i.ibb.co/sjMy1wg/Net-Hunter-Ke-X-App-jpg.webp
If you follow all the steps correctly, you will have the Kali NetHunter GUI running on your Android phone.
https://i.ibb.co/N6Vx9WM/Net-Hunter-on-Android-1-jpg.webp
|
|
|
|
Goto Forum:
Current Time: Fri Jul 31 22:34:52 UTC 2026
Total time taken to generate the page: 0.01516 seconds
|
Search
Help
Members
Register
Login
Home
